Home Automation Installation Auckland & Palmerston North
Smart home automation installed by registered electricians in Auckland & Palmerston North. Honest advice, upfront pricing, no brand. Enquire today for free quote.
Smart Home Automation
Start with one smart dimmer or connect your lighting, heating, security and EV charging through a complete home automation system. Our registered electricians install the equipment, connect it correctly and set up the controls on your phone before we leave.
A smarter home, without the eye-watering price tag
Home automation was once limited to expensive proprietary systems that required specialist support whenever something needed changing. Today’s smart switches, sensors and hubs are far more accessible. They can connect with platforms such as Google Home, Amazon Alexa and Apple Home, giving you simple control over everyday systems around your property.
Good home automation still requires careful planning. We design and install smart home systems across Auckland and Palmerston North based on how you use your home. Because we are registered electricians, we can take care of the circuits, switches and hardwired equipment alongside the smart technology. You get one team, one plan and a system that works properly from the start.
What we can automate around your home
Smart Lighting And Scenes
Control lights individually, group them into rooms or create scenes for different parts of the day. We install smart switches, dimmers and LED strip lighting that can operate through schedules, sensors, an app or voice commands. Options may include PDL Wiser, Zimi, Shelly and Philips Hue, depending on your home and preferred setup.
Heating, Cooling And Hot Water
Control compatible heat pumps remotely, manage selected heating systems through smart thermostats and automate towel rails or hot water around your routine. A well-planned system can help you come home to a comfortable house without leaving equipment running unnecessarily throughout the day.
Security, Cameras And Entry
Bring video doorbells, smart locks, alarms and CCTV into one connected system. You can check who is at the gate, receive alerts when movement is detected or confirm whether the garage door has been left open. We can also connect compatible security equipment with lighting and access controls.
Voice And App Control
We can configure Google Home, Amazon Alexa or Apple Home so you can control compatible devices through one app or simple voice commands. Where suitable, we can use Matter-compatible equipment to improve communication between products from different manufacturers.
Blinds, Gates And Garage Doors
Automate compatible blinds and curtains using schedules, sunlight levels or voice controls. We can also connect automatic gates and garage doors, allowing you to open, close and check them remotely through a secure app.
Energy Monitoring And EV Charging
See where your electricity is being used and schedule compatible equipment around your household routine or off-peak electricity rates. Options include smart EV charger scheduling, energy monitoring, smart plugs and switchboard preparation for future solar or battery systems.
What Home Automation costs (so you're not guessing)
You do not need to automate the whole house at once. A single smart switch or dimmer replacement may cost around $100 to $250 for the equipment, plus standard labour. We will confirm the expected cost before booking the work.
A starter system with a hub, smart lighting in key rooms and several useful scenes may cost approximately $1,500 to $4,000. Larger wireless systems can range from $5,000 to $15,000, depending on the size of the property, the number of connected devices and the products selected.
Fully wired systems such as Control4, C-Bus or KNX generally start above $20,000. These systems can suit larger homes and complex projects, but they are unnecessary for many households. We will explain the options clearly and recommend a setup that suits your property, priorities and budget. Larger projects are covered by a written quote before work begins.
Why Use A Registered Electrician For Home Automation?
You do not need to automate the whole house at once. A single smart switch or dimmer replacement may cost around $100 to $250 for the equipment, plus standard labour. We will confirm the expected cost before booking the work.
A starter system with a hub, smart lighting in key rooms and several useful scenes may cost approximately $1,500 to $4,000. Larger wireless systems can range from $5,000 to $15,000, depending on the size of the property, the number of connected devices and the products selected.
Fully wired systems such as Control4, C-Bus or KNX generally start above $20,000. These systems can suit larger homes and complex projects, but they are unnecessary for many households. We will explain the options clearly and recommend a setup that suits your property, priorities and budget. Larger projects are covered by a written quote before work begins.
Home Automation FAQs
How Much Does Home Automation Cost In NZ?
A simple setup with several smart switches may cost a few hundred dollars, while a fully wired whole-home system can exceed $20,000. Many wireless systems covering lighting, heating or security fall between $1,500 and $8,000. The final cost depends on the equipment, property size, existing wiring and level of integration required. We confirm smaller jobs upfront and provide written quotes for larger installations.
Can You Add Home Automation To An Existing House?
Yes. Many modern smart switches, sensors and hubs can be added to existing homes without complete rewiring. Some hardwired components may require electrical alterations, but we will assess the property and explain what is needed before work begins. If you are building or renovating, planning the wiring while the walls are open can create further options and reduce future installation work.
Is Google Home, Alexa Or Apple Home Best?
The right platform usually depends on the devices and phones your household already uses. Google Home, Amazon Alexa and Apple Home all support a wide range of smart products. We can recommend compatible equipment and consider newer standards such as Matter, which can make it easier for products from different brands to work together.
Will My Smart Home Work Without The Internet?
Essential controls should continue working even if your internet connection drops out. Properly selected smart switches will still operate manually, while systems with local control may continue running selected scenes and schedules. Cloud-dependent functions, including some remote access and notifications, may be temporarily unavailable until the connection returns.
Can I Install Smart Switches And Dimmers Myself?
You can usually set up plug-in equipment such as smart plugs, bulbs and freestanding hubs yourself. Equipment connected directly to fixed wiring, including in-wall switches, relays and switchboard devices, must be handled by an appropriately licensed electrical worker. We install and test hardwired smart equipment and provide the required electrical certification.
Can You Connect Smart Products I Already Own?
In many cases, yes. Existing heat pumps, cameras, gates, garage doors and alarm systems may be compatible with smart modules, hubs or manufacturer integrations. Send us the model details or photos of the equipment and we can check what is likely to connect before recommending additional products.
Book A Home Automation Installation
Start with one room or plan a connected system for the whole house. Tell us what you want to control and we will recommend a practical setup for your home and budget.