Automatic Gate Installation In Auckland And Palmerston North
Open your gate from the car, control who enters your property and secure the driveway without getting out in the rain.
We install automatic sliding gates, swing gates and access controlled entry systems for homes, businesses, body corporates and managed properties across Auckland, Palmerston North and the wider Manawatū.
A Gate That Works The Way Your Property Works
An automatic gate should make daily access easier without creating a weak point at the front of the property. That takes careful planning. The gate must move freely, the motor must suit its size and weight, and every user needs a practical way to enter or leave.
We design the automation, electrical supply and entry controls as one system. That could be a simple remote controlled driveway gate or a managed entrance with fobs, PIN codes, an intercom and a camera covering every access event.
If the gate is part of a wider security upgrade, our CCTV and security systems team can coordinate the complete job.
Automatic Gate Systems We Install
Sliding Gate Automation
Sliding gates run along the fence line instead of opening into the driveway. They are a practical option where vehicles park close to the entrance, the driveway slopes or the property needs a wide opening.
A sliding gate needs enough clear space beside the opening for the gate to travel. We assess the arrangement, guide posts, wheels, stops and ground conditions before selecting the motor.
Sliding gate automation can suit:
- Residential driveways
- Shared accessways
- Apartment and townhouse developments
- Commercial yards
- Storage facilities
- High traffic vehicle entrances
Swing Gate Automation
Swing gates use one or two hinged leaves that open inwards or outwards where the site permits. They suit traditional gate designs and properties with enough clear driveway space for the opening arc.
The right operator depends on the gate width, weight, hinge position, wind exposure and number of daily movements. We can automate single or double swing gates and set the leaves to open in the correct sequence.
Pedestrian Gate Automation And Access
A driveway gate should not force every visitor, courier or staff member through the vehicle entrance. We can add controlled pedestrian access using an electric lock, keypad, fob reader, intercom or phone based credential.
Pedestrian gates can be managed separately from the vehicle gate, giving people access without opening the full driveway.
Commercial And Shared Access Gates
Commercial sites and shared residential entrances need equipment designed for regular use. We consider traffic volume, opening speed, user management, delivery access, event records and what happens during a power or equipment fault.
The system can assign individual fobs, codes or mobile credentials so access can be added or cancelled without replacing locks or collecting every remote.
Compare Automatic Sliding And Swing Gates
| Feature | Sliding Gate | Swing Gate |
|---|---|---|
| Space required | Clear run beside the driveway | Clear opening arc in front of or behind the gate |
| Sloping driveways | Often the practical choice | Suitability depends on slope and opening direction |
| Gate layout | One gate panel | One or two gate leaves |
| Wind exposure | Usually less affected by wind load | Large gate leaves need careful wind assessment |
| High traffic sites | Well suited with the correct operator | Possible with operators selected for the duty cycle |
| Existing gate automation | Track, wheels and guides must be sound | Hinges, posts and gate alignment must be sound |
We will recommend the gate type that suits the entrance. The decision is based on the site, not on which operator is easiest to fit.
Ways To Open And Control Your Automatic Gate
Remote Controls
Remote controls are familiar, quick to use and well suited to household vehicles. We set up each remote and explain how additional units can be added or removed.
Keypads And PIN Codes
A keypad gives family, staff, contractors or regular visitors access without a physical key. On compatible systems, separate codes can be issued and cancelled when no longer needed.
Fobs And Access Cards
Fobs and cards work well for workplaces, apartment complexes and sites with several users. Each credential can be managed individually, which makes lost fobs or staff changes easier to deal with.
For larger premises, we can connect the gate to a wider access control system covering doors, pedestrian entrances and vehicle access.
Phone And App Access
Compatible controllers can let authorised users open the gate from a phone. The available controls depend on the selected equipment, internet connection and access platform.
Intercom And Video Entry
An intercom lets visitors call the house, office or reception before the gate is opened. Video entry adds a live view, helping you check who is waiting without relying on voice alone.
Vehicle Detection And Number Plate Access
Vehicle loops can provide automatic exit or help the controller detect a vehicle in the gate area. Suitable commercial systems can also use authorised number plates as credentials when paired with the correct camera and access platform.
Safety Comes Before Opening Speed
An automatic gate is a moving machine. Poorly chosen equipment, missing safety devices or a gate that does not move freely can create a serious risk around vehicles, children, pets and pedestrians.
We assess the full movement area and specify the safety controls needed for the site. Depending on the design, these may include:
- Photoelectric safety beams
- Vehicle detection loops
- Safety edges on crushing or trapping points
- Force control and obstruction detection
- Physical gate stops and guides
- Warning lights for busy entrances
- A protected manual release for power cuts
- Battery backup where suitable
Safety equipment supports a correctly built and maintained gate. It does not compensate for damaged hinges, poor alignment, worn wheels or unsafe gaps around the moving panel.
Can We Automate Your Existing Gate?
Often, yes. An existing gate is a good candidate when it is structurally sound, correctly aligned and easy to move by hand. The motor should drive the gate rather than drag a heavy or binding gate through its travel.
Before quoting, we check:
- Gate condition, size and weight
- Posts, hinges, wheels, track and guides
- Opening direction and available travel
- Ground clearance and driveway slope
- Wind exposure
- Space for the operator and safety equipment
- Access to a suitable electrical supply
- Drainage around ground level equipment
If repairs or gate modifications are needed first, we will identify them during the assessment. This avoids fitting a new motor to a gate that will damage the operator or become unreliable.
Power, Cabling And Backup Options
Reliable gate automation starts with the electrical design. We plan the power route, isolation, control cabling and underground ducts around the driveway and gate equipment.
Mains power is usually the preferred option where a practical supply is available. Battery backup can keep selected systems operating during a power cut, subject to the operator, battery condition and number of movements required. Solar may suit some remote entrances, but the panel location, daily traffic and seasonal sunlight need to be assessed before it is recommended.
Our electrical team handles the gate power and control connections, so the automation and electrical work are planned together.
Automatic Gate Installation Costs
Automatic gate pricing depends on the gate type, operator, access controls, safety equipment, cabling route and condition of the existing gate. A straightforward residential swing gate has different requirements from a shared sliding entrance opening throughout the day.
Your quote may include:
- Gate motor and control panel
- Mounting hardware
- Safety beams, loops or edges
- Remotes, keypad, fob readers or app controls
- Intercom or video entry
- Electrical supply and underground cabling
- Battery backup or solar equipment
- Gate repairs or modifications where agreed
- Programming, testing and user setup
We provide a written quote after inspecting the entrance. The proposed equipment and inclusions are listed clearly before installation begins.
Flexible Payment Options
A new automatic gate can be planned without paying the full cost upfront. We offer several payment options for eligible customers.
24 Months Interest Free With Q Card
Pay for your heat pump installation with up to 24 months interest free through Q Card.
6 Months Interest Free With Gem
Gem customers can access six months interest free, subject to the applicable purchase and account requirements.
Afterpay
Afterpay is available for eligible purchases, with payments made according to the approved Afterpay schedule.
Ask us about payment options when requesting your quote. Lending criteria, minimum purchase amounts, fees and provider terms and conditions may apply. Interest may apply to any balance remaining after an interest free period ends.
Our Automatic Gate Installation Process
Step 1: Site Assessment
We measure the entrance, operate the gate by hand, inspect the hardware and check the driveway layout. We also discuss who needs access, how often the gate will operate and how visitors should contact you.
Step 2: System Design And Quote
We select an operator for the gate size, weight and expected daily use. The written quote covers the opening controls, safety devices, electrical work and any preparation needed before installation.
Step 3: Installation And Wiring
We install the operator, controller, safety equipment and access devices. Power and control cabling are routed neatly, with outdoor equipment positioned and protected for the site conditions.
Step 4: Programming And Safety Testing
We set the travel limits, opening sequence, automatic closing behaviour and access credentials. The safety devices and manual release are tested before handover.
Step 5: Handover
We show you how to open, close and release the gate, manage the available access controls and deal with a power cut. You will know how the system works before we leave.
Connect Your Gate With CCTV
A gate controls the entrance, while cameras show who approached and what happened around it. Positioning a camera at the driveway can provide a useful view of vehicles, visitors and access activity.
Professional CCTV installation can be planned alongside the gate, intercom and access system. Coordinating the work early gives us a cleaner cabling route and avoids reopening the driveway or trench later.
Automatic Gates For Homes, Businesses And Managed Properties
Homes And Lifestyle Properties
Open the driveway from the car, let visitors in from inside the house and keep the entrance closed when children or pets are outside.
Offices And Commercial Premises
Control staff, visitor and contractor entry with separate credentials. Gates can work with scheduled access, intercoms and existing security systems.
Warehouses And Yards
Manage early starts, delivery access and after hours vehicle movements with equipment selected for regular use and the width of the entrance.
Body Corporates And Shared Driveways
Issue individual fobs or access credentials, remove lost ones and provide a clear process for residents, managers and service contractors.
Schools, Clubs And Community Facilities
Use scheduled opening times and controlled access outside normal hours, with safety equipment designed around the people and traffic using the entrance.
Automatic Gates In Auckland And Palmerston North
We install automatic gates across Auckland, Palmerston North and the wider Manawatū. Auckland sites often need careful planning around compact driveways, shared access and coastal exposure. Palmerston North and Manawatū properties can involve wider entrances, exposed sites and longer power or cabling runs.
We assess the individual entrance rather than assuming the same gate setup will suit every property.
Frequently Asked Questions
How Much Does An Automatic Gate Cost In NZ?
The cost depends on the gate, motor, safety devices, access controls and electrical work. Retrofitting a sound existing gate is usually a different scope from supplying automation that also needs new posts, hardware or substantial gate repairs. We provide a site specific written quote.
Is A Sliding Or Swing Gate Better?
Sliding gates suit many sloping driveways, compact vehicle areas and wider entrances, provided there is enough space beside the opening. Swing gates suit properties with sound posts and a clear opening arc. We check the driveway and gate movement before recommending either option.
Can You Add A Motor To My Existing Gate?
Yes, if the gate is structurally sound, correctly aligned and moves freely. Worn hinges, damaged track, weak posts or a gate that drags must be corrected before automation is fitted.
What Happens During A Power Cut?
Automatic gates include a manual release so the gate can be operated without mains power. Selected systems can also use battery backup. We demonstrate the release process at handover and recommend keeping the release key in a secure, accessible place.
Can I Open The Gate From My Phone?
Yes, when a compatible controller and connection are included. Phone access may use an app, mobile credential or intercom platform. We will explain any connectivity or subscription requirements before you choose the system.
Can Couriers And Visitors Use The Gate?
We can provide a keypad, audio or video intercom, temporary credential or another controlled entry method. The right option depends on how often visitors arrive and who will approve entry.
Do Automatic Gates Need Safety Beams?
Safety beams are commonly used to detect a person or vehicle in the gate path, but the complete safety design depends on the gate and its surroundings. Some sites also need vehicle loops, safety edges, force control or protective guarding.
How Often Should An Automatic Gate Be Serviced?
Service frequency depends on the operator, traffic level and environment. A busy shared or commercial gate needs closer attention than a residential gate used a few times each day. We recommend following the manufacturer schedule and arranging an inspection if the gate becomes noisy, slow or inconsistent.
Can The Gate Work With My Existing Security System?
Often, yes. Gate controls can be connected with compatible access control, intercom, CCTV and alarm equipment. We inspect the existing system first and confirm which functions can be retained or integrated.
Book An Automatic Gate Site Assessment
Tell us about the entrance, gate type and how you want people to gain access. We will inspect the site, recommend a practical automation setup and provide a clear written quote.
Serving Auckland, Palmerston North and the wider Manawatū region.